aluminum discs blank
The most common question I get ask regarding metal spinning is where can I get the metal aluminum discs blank? Here is your answer. We are going to offer aluminum discs blank in a select range of sizes but will add more selection as we see demand.
The standard product offering is alloy 1100-0. Considered commercially pure aluminum, this series is the softest of aluminum alloys but is very ductile and offers excellent machining, forming and welding characteristics, as well as very high corrosion resistance and good electrical conductivity. Uses include lighting reflectors, chemical and food processing vessels, as well as packaging, electrical wiring, transformer conductor coil, and decorative applications.
Product Range
Alloy |
Temper |
Specification |
|
Thickness(mm) |
Diameter(mm) |
||
1050,1060
1070,1100,3003 |
O,H12,H14 |
0.40—6.0 |
20--1200 |
Product Properties
TEMPER |
THICKNESS(mm) |
TENSILE STRENGTH |
ELONGATION% |
Standard |
||||||||||||||||
HO |
0.36-6 |
60-100 |
≥ 20 |
GB/T91-2002
|
||||||||||||||||
H12 |
0.5-6 |
70-120 |
≥ 4 |
|||||||||||||||||
H14 |
0.5-6 |
85-120 |
≥ 2 |
Chemical Properties(WT.%)
Alloy |
Si |
Fe |
Cu |
Mn |
Mg |
Cr |
Ni |
Zn |
Ca |
V |
Ti |
Other |
Min.A1 |
1050 |
0.25 |
0.4 |
0.05 |
0.05 |
0.05 |
- |
- |
0.05 |
- |
0.05 |
0.03 |
0.03 |
99.5 |
1060 |
0.25 |
0.35 |
0.05 |
0.03 |
0.03 |
- |
- |
0.05 |
- |
0.05 |
0.03 |
0.03 |
99.6 |
1070 |
0.25 |
0.25 |
0.04 |
0.03 |
0.03 |
- |
- |
0.04 |
- |
0.05 |
0.03 |
0.03 |
99.7 |
1100 |
0.95 |
0.05-0.2 |
0.05 |
- |
- |
- |
0.1 |
- |
- |
- |
0.05 |
99 |
|
3003 |
0.6 |
0.7 |
0.05-0.2 |
1.0-1.5 |
- |
- |
- |
0.1 |
- |
- |
- |
0.15 |
96.95-96.75 |
Diameter List
≧20 |
≧140 |
≧170 |
≧200 |
≧250 |
≧300 |
≧400 |
≧500 |
≧600 |
≧700 |
≧800 |
20 |
140 |
170 |
200 |
250 |
300 |
400 |
500 |
600 |
700 |
800 |
25 |
141 |
172 |
203 |
252 |
305 |
405 |
505 |
610 |
705 |
810 |
93 |
142 |
173 |
205 |
254 |
310 |
410 |
510 |
615 |
710 |
838 |
100 |
143 |
175 |
210 |
255 |
312 |
420 |
515 |
619 |
720 |
890 |
105 |
144 |
176 |
211 |
258 |
315 |
425 |
520 |
630 |
730 |
902 |
109 |
145 |
177 |
212 |
260 |
320 |
430 |
525 |
635 |
740 |
945 |
110 |
147 |
178 |
215 |
267 |
325 |
435 |
530 |
645 |
760 |
960 |
112 |
149 |
180 |
216 |
268 |
330 |
440 |
540 |
650 |
770 |
1000 |
115 |
150 |
181 |
217 |
270 |
335 |
445 |
545 |
655 |
780 |
1150 |
118 |
153 |
182 |
218 |
272 |
340 |
450 |
550 |
665 |
1200 |
|
120 |
154 |
183 |
220 |
274 |
345 |
455 |
560 |
670 |
||
121 |
155 |
184 |
221 |
275 |
350 |
460 |
565 |
680 |
||
122 |
157 |
185 |
222 |
277 |
355 |
465 |
570 |
690 |
||
123 |
158 |
188 |
225 |
278 |
360 |
470 |
575 |
|||
124 |
160 |
190 |
226 |
280 |
364 |
475 |
580 |
|||
127 |
161 |
192 |
230 |
282 |
368 |
480 |
585 |
|||
128 |
162 |
193 |
233 |
285 |
370 |
485 |
||||
129 |
163 |
195 |
235 |
290 |
375 |
490 |
||||
130 |
164 |
198 |
237 |
292 |
380 |
495 |
||||
132 |
165 |
238 |
293 |
385 |
||||||
133 |
166 |
240 |
295 |
390 |
||||||
134 |
167 |
242 |
395 |
|||||||
135 |
168 |
245 |
||||||||
136 |
169 |
249 |
||||||||
137 |
||||||||||
138 |
||||||||||
139 |
* Please enquire if you are interested in products outside the above ranges
Diameter Tolerances
Blanked and Sheared aluminum discs blank Products |
||||
Thickness(mm) | Diameter Range (D)(mm) | |||
D <= 455 | 455 < D <=1000 | 1000 < D <=1200 | ||
.4 - 6.0 | +/-.079 | +/-.099 | +/-.015 | |
|
Applications
Cookware
Haomei has more than 10 years' experience in producing aluminum discs blank for the cookware and small appliance industries. Our product is currently being used to make:
Stock pots, Fry pans, Tea kettles, Pressure cookers, rice cookers, pizza pans, electric skillets, restaurant cookware, coffee urns, bakeware, steam irons, woks, stainless cookware bottom plates, bread makers
Deep Drawing Quality - Haomei's specialty is in deep drawing quality. Grain size is tightly controlled to minimize the "orange peel effect". This is a rough surface, like the surface of an orange peel, which often occurs after deep drawing. Haomei tightly controls the chemistry and heat treating to maximize the elongation that allows the materials to stretch more.
Anodizing Quality - Our aluminum discs blank are commonly used in high quality anodizing cookware. We are good at providing a very consistent anodizing surface.
Heavy Gauge Circle - Haomei can produce aluminum discs blank with thicknesses up to 6mm thick. Such thicknesses are commonly required with commercial quality cookware.
Lighting
Some of the current applications for our aluminum discs blank products are:Recessed Lighting ,High Bay Industrial Lighting,Low Bay Industrial Lighting,Street Lighting,Traffic Light Reflectors,Sports Lighting
Packaging & Delivery
aluminum discs blank of haomei Aluminum. meet the export standard. Plastic film and brown paper can be covered at customers’ need. What’s more, wooden case or wooden pallet is adopted to protect products from damage during the delivery. There are two kinds of packaging, which is eye to wall or eye to sky. Customers can choose either of them for their convenience. Generally speaking, there are 2 tons in one package, and loading 18-22 tons in 1×20′ container, and 20-24 tons in 1×40′ container.
As you can see, these different aluminum discs blank' size including customized shape and sizecan create a range of different aluminium round metal in different time frames. Some are for very specific purposes while others cover a wider range of round metal cookware needs. If you still have questions about the different aluminum discs blank' size or for more information, please contact us.E-mail: wade@haomeicn.com